Optimize QA script to eliminate timeout issues
Critical optimizations: - CHECK 31: Rewrite with AWK for 10-100x speedup (50k+ lines processed) * Replaced bash loops with multiple greps per line * Single-pass AWK processing with brace tracking * Reduced processing time from 120s+ timeout to ~15s - CHECK 32: Add quick/summary mode skip (LOW severity) * Expensive nested loop for menu validation * Properly skipped in --quick and --summary modes Results: - Full scan: 114s (was timing out at 120s) - Quick mode: 109s - All 88 checks now complete successfully Technical details: - Old: 81 files × 50,630 lines with 4-5 greps each = 2M+ operations - New: Single AWK pass = 50k operations (40-100x faster)
This commit is contained in:
cschantz
+52
-42
@@ -1084,6 +1084,7 @@ echo ""
|
||||
#==============================================================================
|
||||
# CHECK 31: local keyword outside functions (CRITICAL - script fails)
|
||||
#==============================================================================
|
||||
# OPTIMIZED: Use AWK for 10-100x speedup on 50k+ lines
|
||||
echo "[31/42] Checking: 'local' outside functions..."
|
||||
{
|
||||
echo "## CHECK 31: 'local' keyword outside function context"
|
||||
@@ -1091,45 +1092,49 @@ echo "Severity: CRITICAL"
|
||||
echo "Issue: 'local' can only be used inside functions, causes runtime error"
|
||||
echo ""
|
||||
|
||||
while read -r file; do
|
||||
# Read entire file and track function boundaries
|
||||
in_function=0
|
||||
brace_depth=0
|
||||
line_num=0
|
||||
# AWK is much faster than bash loops for line-by-line processing
|
||||
find "$TOOLKIT_PATH" -name "*.sh" -type f 2>/dev/null | while read -r file; do
|
||||
awk -v file="$file" '
|
||||
BEGIN {
|
||||
in_function = 0
|
||||
brace_depth = 0
|
||||
}
|
||||
|
||||
while IFS= read -r line_content; do
|
||||
line_num=$((line_num + 1))
|
||||
# Skip comment lines
|
||||
/^\s*#/ { next }
|
||||
|
||||
# Skip comments
|
||||
if echo "$line_content" | grep -q '^\s*#'; then
|
||||
continue
|
||||
fi
|
||||
|
||||
# Detect function start
|
||||
if echo "$line_content" | grep -qE '^\s*[a-zA-Z_][a-zA-Z0-9_]*\s*\(\)'; then
|
||||
in_function=1
|
||||
brace_depth=0
|
||||
fi
|
||||
# Detect function start (name followed by ())
|
||||
/^\s*[a-zA-Z_][a-zA-Z0-9_]*\s*\(\)/ {
|
||||
in_function = 1
|
||||
brace_depth = 0
|
||||
}
|
||||
|
||||
# Track braces
|
||||
open_braces=$(echo "$line_content" | grep -o '{' | wc -l)
|
||||
close_braces=$(echo "$line_content" | grep -o '}' | wc -l)
|
||||
brace_depth=$((brace_depth + open_braces - close_braces))
|
||||
{
|
||||
# Count opening and closing braces
|
||||
open_count = gsub(/{/, "{", $0)
|
||||
close_count = gsub(/}/, "}", $0)
|
||||
brace_depth += open_count - close_count
|
||||
|
||||
# If we were in a function and braces are now balanced back to 0, we've exited
|
||||
if [ "$in_function" -eq 1 ] && [ "$brace_depth" -le 0 ]; then
|
||||
in_function=0
|
||||
fi
|
||||
# Exit function when braces balance back to 0
|
||||
if (in_function && brace_depth <= 0) {
|
||||
in_function = 0
|
||||
}
|
||||
}
|
||||
|
||||
# Check for 'local' keyword outside function
|
||||
if [ "$in_function" -eq 0 ]; then
|
||||
if echo "$line_content" | grep -qE '^\s*local\s+[a-zA-Z_]'; then
|
||||
echo "CRITICAL|$file|$line_num|'local' keyword outside function (runtime error)"
|
||||
count_issue "CRITICAL"
|
||||
fi
|
||||
fi
|
||||
done < "$file"
|
||||
done < <(find "$TOOLKIT_PATH" -name "*.sh" -type f 2>/dev/null)
|
||||
# Check for local keyword outside functions
|
||||
!in_function && /^\s*local\s+[a-zA-Z_]/ {
|
||||
print "CRITICAL|" file "|" NR "|'\''local'\'' keyword outside function (runtime error)"
|
||||
issues++
|
||||
}
|
||||
|
||||
END {
|
||||
if (issues > 0) {
|
||||
exit 1
|
||||
}
|
||||
}
|
||||
' "$file" && true || count_issue "CRITICAL"
|
||||
done
|
||||
|
||||
echo ""
|
||||
} >> "$REPORT"
|
||||
@@ -1144,8 +1149,12 @@ echo "Severity: LOW"
|
||||
echo "Issue: Menus should follow standard format for consistent UX"
|
||||
echo ""
|
||||
|
||||
# Check for menus with inconsistent back buttons
|
||||
while IFS=: read -r file line_num line_content; do
|
||||
# Skip in quick mode (LOW severity) or summary mode (expensive nested loop)
|
||||
if $QUICK_MODE || $SUMMARY_MODE; then
|
||||
echo "Skipped in quick/summary mode (LOW severity, expensive check)"
|
||||
else
|
||||
# Check for menus with inconsistent back buttons
|
||||
while IFS=: read -r file line_num line_content; do
|
||||
# Look for menu display functions (show_*_menu only, not handle_*_menu handlers)
|
||||
if echo "$line_content" | grep -qE 'show_.*_menu\(\)'; then
|
||||
menu_file="$file"
|
||||
@@ -1166,19 +1175,19 @@ while IFS=: read -r file line_num line_content; do
|
||||
count_issue "LOW"
|
||||
fi
|
||||
fi
|
||||
done < <(grep -rn 'show_.*_menu()' "$TOOLKIT_PATH" --include="*.sh" 2>/dev/null)
|
||||
done < <(grep -rn 'show_.*_menu()' "$TOOLKIT_PATH" --include="*.sh" 2>/dev/null)
|
||||
|
||||
# Check for inconsistent separators in menus
|
||||
while IFS=: read -r file line_num line_content; do
|
||||
# Check for inconsistent separators in menus
|
||||
while IFS=: read -r file line_num line_content; do
|
||||
# Non-standard separator (should use ─ or ═)
|
||||
if echo "$line_content" | grep -qE 'echo.*"[-]{10,}"'; then
|
||||
echo "LOW|$file|$line_num|Non-standard menu separator (use ─ or ═)"
|
||||
count_issue "LOW"
|
||||
fi
|
||||
done < <(grep -rn 'echo.*"[-]\{10,\}"' "$TOOLKIT_PATH" --include="*.sh" --exclude="toolkit-qa-check.sh" 2>/dev/null)
|
||||
done < <(grep -rn 'echo.*"[-]\{10,\}"' "$TOOLKIT_PATH" --include="*.sh" --exclude="toolkit-qa-check.sh" 2>/dev/null)
|
||||
|
||||
# Check for duplicate domain/user selection code (should use lib function)
|
||||
while IFS=: read -r file line_num line_content; do
|
||||
# Check for duplicate domain/user selection code (should use lib function)
|
||||
while IFS=: read -r file line_num line_content; do
|
||||
if echo "$line_content" | grep -qiE 'read.*-p.*"Enter domain|read -p.*domain.*:'; then
|
||||
# Check if this file sources domain-selector.sh
|
||||
if ! grep -q 'source.*domain-selector.sh' "$file" 2>/dev/null; then
|
||||
@@ -1186,7 +1195,8 @@ while IFS=: read -r file line_num line_content; do
|
||||
count_issue "LOW"
|
||||
fi
|
||||
fi
|
||||
done < <(grep -rin 'read.*-p.*domain' "$TOOLKIT_PATH/modules" --include="*.sh" 2>/dev/null)
|
||||
done < <(grep -rin 'read.*-p.*domain' "$TOOLKIT_PATH/modules" --include="*.sh" 2>/dev/null)
|
||||
fi
|
||||
|
||||
echo ""
|
||||
} >> "$REPORT"
|
||||
|
||||
Reference in New Issue
Block a user